A Complete Guide to Assessment Validation and Validating Assessments

A Complete Guide to Assessment Validation and Validating Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.

Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.

What are the Two Types of Assessment Validation?

Assessment Validation Unpacked

As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

We will dedicate this article to assessment tool validation.

Steps for Conducting Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Optimal Timing for Assessment Tool Validation

The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- resources get updated
- add new training products on scope
- course is reviewed by you against training product updates
- your learning resources get identified as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Which Training Products Should You Validate?

Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.

Resources Required for Assessment Tool Validation

Educational Materials

To validate assessment tools, you need the complete suite of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.

Validation Panel

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

Your validation panel must, as a group, possess:

Relevant vocational competencies and up-to-date industry skills for the unit being validated

Up-to-date knowledge and skills related to vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or the equivalent successor

Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?

Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Core Rules

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:

Be Consistent with Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappy changing

prepare bottle, bottle feed babies and clean equipment

prepare solid food and feed babies

appropriately respond to infant signs and cues

prepare and settle babies for sleep

monitor and encourage age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

Entire or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

The answer could include:

Necessary resources

Relevant expenses

Activity timeframe

Assigned functions and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is Assessment validation process Australia reliable, and the evidence collected is valid.

The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, engineering controls, administration

Equipment or machinery – isolation, engineering, administration

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.